DIY - Birds do it yourself from different materials. Birds from burlap. Master class of birds from jute do it yourself

Svetlana Bolshakova

Birds from jute twine I saw on the Internet and immediately fell in love with them. Stated to look master Class. And where do you think found? Yes, here, on Maama, the teacher Natalia Stolyarevskaya. By her MK, I made my two first birds. Now I do on the MK of another masterbut about it later.

The very first birds of happinesschopping birdswere the attribute of any Pomeranian home. Bird brought over the table, and when Samovar put on the table, then bird began to rotate, obeying the streams of hot steam. Bird of Happiness - Charger, Keeper of home hearth and well-being. Already later birds began to make not only wooden chips, but also from straw, rubbing, paper, fabric, etc.

I'll try to tell how to do bird I.. You can see Natalia Stolyarovskaya.

Bird is made from jute twine and bright threads, I have "Iris." Wind the book shpagat, the number of turns should be divided into 5, making 20 circles

3-4 circles in the center when winding make 1 cm longer - put a finger or pencil, it will be the beak

We make the beak, tightly wound on this centimeter red threads, starting from the head, and then back. Cut the thread and hide under the winding. I used a needle with a big ear for this

Small pieces shpagata We make the head of the birds, wrapped over and under the beak

After approximately 2 cm, wind the neck of the red thread

Making wings just like the body birds, bandage in the middle and insert into the body as the hands of the Cuvucky Dolls

Fix the thread below the wings and make the Coast Cross, like a folk doll

We divide the wing on 5 equal parts and begin to wipe "feathers" in a checker

We also decorate the tail, cutting the thread of wings and tail

Here bird is ready, you can hang it under the ceiling

I started to do, as I wrote in the last publication, the calendar with folk dolls. In detail, I will tell you about it later when I do, but now briefly. For the month of March, Martynichek small dolls made. And for April you can make a doll to the reclide, or the Easter doll, or a spring, and you can and the bird Happiness. I want to do everyone, but there are few places. While made a little bird

Here is a piece of calendar circle

I wanted to consult with you, expensive connoisseurs of folk dolls and needlewomen, about the pupa for May month. Recommended to make a cuckoo doll. But how to fulfill it in a small version, I do not know, or rather I am afraid that it will not work. What kind of doll can you advise me?

Publications on the topic:

"For Valentine's Day." For Valentine's Day I propose to make the original gift with your own hands. "The Bird of Happiness". Creature.

On the eve of the holiday of all lovers, I want to show you children's master Class "Bird of Happiness." Personally, I believe that happiness is.

Master class abstract for parents and children "Bird of Happiness" An abstract of master class for parents and children "Bird of Happiness" held during the project " New Year's toys"Prepared an educator.

I will start with what I, definitely, lucky with pupils. Although they are a lot (39, but they are so smart (although it is impossible to allocate by.

Hello, dear colleagues Maamovtsy! I want to offer you a simple master class origami "Bird of Happiness". We will need: - Color.

Purpose: Fasten the main colors (blue, red, yellow, green). Develop creative skills, creative and fantasy. Tasks: learning neatly.

Crafts of birds have always been greatly popular among homemade-creative lovers. Especially relevant figurines of bird creatures per day of birds, which is celebrated in spring on April 1 in kindergartens and schools. The holiday is devoted to the return of migratory birds and marks the offensive of spring and updating the woken nature. On this day, the children of all ages make crafts of birds, and schoolchildren older thanks to master the birdhouses and hang them on the trees.

Crafts of birds can be made of the most common different materials: cotton disks, colored paper, plastic bottles, salted dough, natural and any girlfriend. There are many options for creating birds - from simple for small children and to complex, which may well have mastered schoolchildren, resorting to the help of adults.

We bring to your attention a few lessons to create feathers with their own hands with step by step instructions, schemes and tips. We hope that they will help you explore all the subtleties of this exciting process and fill in new bright ideas.

We will need: plastic bottles of various colors, foam, wooden chorbacker as stand, metal twist, foil and thin colored plastic, adhesive gun.

The first step, cut off the peacock torso along with the head of the foam, not forgetting to make small recesses at the place of the eye. Fuck it on a wooden chorbacker with a metal twist, which plays the role of legs.

Step second. We make a sufficient number of peacock feathers from plastic bottles of different colors. We will need three types of feathers: long for tail, short for neck and a little more authentic for the body. To do this, cut off from the bottle of the bottom and the neck and cut it along into 3 parts.

One end of each strip is spinning with scissors and cutting her edges on thin stripes in such a way that it looks like a bird's feather. The rounded end of feathers designed for the tail, decorate the two-three multi-colored ovals of foil and plastic. You can attach them using a stapler.

Step Three. Cut from a red plastic bottle of beak and secure it into place. Next, we graspically glue with a glue pistol feathers on the body of the bird, starting with the tail and ending with the neck. We attach feathers a little vents, as shown in the photo. Do not forget that the mines of medium length are intended for the body, and meek - for the neck.

Step fourth. Cut out of the colored plastic of the hooker of any form, which will tell our fantasy, and glit it on your head. Using acrylic paints, draw the eyes of Pavlin. You can glue cilia cut from a transparent plastic bottle.

Pitch fifth. We proceed to the manufacture of the tail, using the abrasive grid for this. At the base of the feathers, we make holes and attach them to the grid with a thin wire.

The manufacture of the tail is starting from the end, stepped by rows of overlapping feathers on each other until the luxurious long tail of the bird does not fully. After that, we attach it to the body and send the peacock made with your own hands from plastic bottles, to a plot among colors and greens.

Salted Test Fire Bird - Master Class

By the day of the birds, together with children, you can make a bulk fire-bird from salt dough. The work will take little time, it will require quite a few materials and will provide the guys a cheerful and festive mood.

We will need: salty dough, gouache or watercolor paints, colorless varnish.

Step one. Making salted dough. To do this, mix the glass of flour with a glass salt and knead the dough, the bundle of 100 ml of brewed starch. It is prepared as follows: Strachmal is divorced in 100 ml of cold water and poured a glass of cool boiling water into this mixture.

Step second. We divide salt dough on 5 pieces and paint them in different colors. To do this, add a gouache or watercolor paint to each piece and a little more than once again. Next, draw a sketch of the febrile and sculpt the details of the bird: wings and torso. Dry them in the oven at low temperatures.

Step Three. We make tail fabulous bird. We draw feathers stencils and sculpt them from pink and blue salty test. Drying feathers in the oven. Further, all the details of the birds are painted with paints, cover with colorless varnish, connect. We make a craft colorful festive panel. Firebird from salt dough ready!

Birds from cotton disks - master class

Another very cute handicraft, which is perfect for decoration kindergarten In a wonderful holiday day of birds. It is done easily, fun and very quickly. Children can be attached to the manufacture of birds from cotton disks.

For creativity, we will need: cotton wheels, wooden spanks, colored paper, narrow colored ribbons, plastic eyes, glue and scissors.

Operating procedure:

We take 5 cotton disks to create one bird. One disc is cut into two halves, and four leave it integer.
We fix two pairs of cotton disks on a skeleton with glue in such a way that it is inside. One pair of disks plays the role of the head of the bird, and the other torso.
We glue to the body from two sides of the half of the cut-off cotton disk - it will be our wings.
We stick to the head of the eyes and keyboard cut from a piece of colored paper, and decorate the bird with a ribbon. Cute chick from cotton disks for birds day is ready!

Owl of Colored Paper - Master Class

Cute owls for celebrating birds day at school can be made with their own hands from colored paper. We will be needed directly by colored paper, scissors, double-sided tape and glue.

Operating procedure:

We make a cylinder from a sheet of colored paper, glue its edges on the one hand, as shown in the photo, and adjust the middle so that there are ears.
Cut from paper heart and glue to the bottom of the cylinder - these are the paws of the owls.
Cut the same circles in size and stick them on central part Cylinder as a plumage. So that the circles gave the craft volume, it is better to stick them with the help of bilateral scotch.
Cut the triangle of the same color as the paws, and glue it at the top of the plumage is the beak.
Last but we glue your eyes, cutting the mugs for them from black and white paper. Owl, made with your own hands, ready!

Paradise Polymer Clay Bird With Your Hands - Master Class

Delightful paradise birds are made of polymer clay solidifying in the air. This modern material is also familiar to us under the names "self-seating plasticine", "Mass for modeling" and "velvet plastic". For the manufacture of charming feathered creations, we need aluminum wire with a diameter of 1 mm, polymer clay, foil, scissors, roundheads, stack, glass of clay rolling, a little patience and diligence.

Operating procedure:

We create both three birds at once - while it is one, the rest dries. Cut the wire size twice as long than the planned tail. Half wire wrap foil, smile to her and forming birds to the bird.
We make the paws from the wire, as shown in the photo, and insert them in the Taurus. We take a piece of clay, form it in the form of sausages, then roll over and flatter. Gently pull the wire from the bird, we put it inside the clay sausages, rolling with a glass. Insert the finished color tail back in the Taurus. In the same way, we make the blanks of the other two birds.
We take a piece of blue, yellow and red clay, rolling them and gradually, smearing with your fingers, get the birds, they will crack the whole foil. We will have three billets of bright birds.
Starting from the center, enter the paws. Then take a piece of clay of the appropriate color and make cheeks, top and key. From the balls of black clay, they sculpt the eyes, not forgetting to squeeze around them the stack of the top and lower eyelids.
Create a tail and a hooker. To do this, cut a few wires with the length we need and ride them into clay. When it dries, spin tips with the help of round-rolls and insert the tail details in the bird's body. Shorter feathers make out of thin clays of clay, spinning them tips.
The effect of the plumage is done by imposing pieces of clay on the caller in the form of droplets and having worked as a needle in the direction of the growth of feathers. With the help of a needle, make peristry throughout the body of birds. For brilliance, the eyes can be covered with their lacquer. The wonderful paradise bird made with your own hands is ready!

More ideas and schemes of crafts of birds from various materials

For needlewomen, acquaintances with the technique of Isoni, will not be difficult to create paintings with beautiful white swans and decorate them holiday, damage birds. Threads for creativity are better to take Moulin or Iris. From the Pouring Cardboard side, we draw a swan and wipe the waves. We divide the drawing on the details, drawing the figures different sizeAnd embroider in the technique of Isoni.

From woolen threads it turns out a very charming person. It can easily be created with his own hands on a simple and understandable scheme.

And according to this scheme, introducing children to the work of children, you can make a bird of happiness from a beautiful bright fabric.

The creation of such a colorful bird from the circles of colored paper is even small kids.

The charming bird can be made even from strips of colored paper and linen clothespins.

Bird, made by hand to the day of the birds, can be planted into the nest glued from paper plates.

Simple clothespins in the hands of craftsmen are able to turn into an extraordinary fabulous bird.

And finally, the idea of \u200b\u200bcrafts of birds from natural and primary materials: cedar or pine cones, painted feathers, cardboard and plasticine.

Want to make one or bouquet of them?

This birds look very beautiful. In general, burlap is very interesting material for creativity. With a certain approach, it can wake very new and unexpected "paints". For example, imagine (or even try): if such birds are on abdomen, cheeks and wings toned with a dry brush with gold. It turns out very rich and beautiful. The main thing is not to overdo it. Still, burlap requires a certain simplicity.

And you can make them in a completely different style. For example, coffee. Burlap and coffee - a wonderful combination. In general, yes, burlap wonderful material.

Required materials and tools:

Template - paper pattern. (You will find it under the cut)
Sackcloth
Heat and Bond is such a glue (there are many different), which is poured between rags, and then they stroke them with the iron, and they stick together. Such material was used by the author of the master class. But for my taste, there is better to use thermo-flierizelin.
Filler. For example: polyfil, wool, syntheps, what has or what you like more.
Black large beads or beads - two pieces.
Black acrylic paint
Thin brushes
Adhesive pistol or glue "Moment-crystal"
Flexible but not too thin wire
Spada Jute or Rough Linen Rope - should approach the torus in color and appearance
Needle and thread
Sewing machines (optional)

But this is our template. Print, cut out.

For Croy, we use both burlap and lining. We will need a lining so that the package does not stick between rare burlap threads. And we will use glue phlizelin as lining (or we stick it to special glue). At the same time, it will strengthen the decorative but loose burlap, and keeps the toy from sprinkling and plenty.

Cut the poultry pattern, leaving points on the sewing sewing. Sust them, but do not forget to leave the hole at the bottom, (where two pins are marked on the pattern). Through this vehicle, we will fill a toy.

After filling the hole gently sew the imperceptible seam.

Now we take the wire and make a tail from it. To do this, it must be bent as in the photo.

Burning a wire billet of the tail is wrapped with a rope. Someone should drop the glue on the wire, so that the rope is tightly held. Every somewhat revolutions. Leave your bare tip. We will stick it in Taurus.

So thus stick the tail on the place put it. Do not forget to glue everything well.

In the same way, wings are made. Only they have a two pen, and not three, like on the tail.

Attach the wings on their places on both sides.

Now in the fingers we turn the rope into such a decorative spirals.

We glue these decorative decorations on the wing, the body and the head of the bird. Look at how it is done in the photo, or think up your options. But in this case, the mugs of the rope cover the place of fastening of the wings that we make the bird even more carefully.

Now acrylic black paint paint the keyboard. And the eyes are made of beads.

So that the bird can be hung, for example, on the Christmas tree, you must attach a looping to it.

The looping is also glued with glue.

Here is such a bird in the end turns out. She is ready and very nice in his naive rustic manner. But you can still, as I have already written at the beginning, slightly toned it in some places in gold or coffee paint.