Water pump station operator job description. Water supply operator. Instructions for pumping station operator in housing and communal services

I CONFIRM:

[Job Title]

_______________________________

[Name of organization]

_______________________________

_______________________/[F.I.O.]/

"______" _______________ 20___

JOB DESCRIPTION

Pumping unit operator, 5th category

1. General provisions

1.1. Real job description defines and regulates the powers, functional and job responsibilities, rights and responsibilities of a 5th category pumping unit operator [Name of the organization in the genitive case] (hereinafter referred to as the Company).

1.2. category is appointed to a position and dismissed from a position as established by the current labor legislation by order of the head of the Company.

1.3. A 5th grade pumping unit operator belongs to the category of workers and reports directly to [name of the position of the immediate supervisor in the dative case] of the Company.

1.4. A person with a secondary education vocational education and appropriate training without any work experience requirements.

1.5. IN practical activities The operator of 5-grade pumping units must be guided by:

local acts and organizational and administrative documents of the Company;
internal rules labor regulations;
rules of labor protection and safety, ensuring industrial sanitation and fire protection;
instructions, orders, decisions and instructions from the immediate supervisor;
this job description.

1.6. A 5th grade pumping unit operator must know:

arrangement and design of equipment for high-power pumping units equipped with engines, pumps and pipe pumps of various systems;
design and layout of outer chambers, wells, pipelines and filters;
water supply schedule for the serviced area;
methods of protecting electrical equipment from overvoltage;
rules for performing work without removing voltage from electrical networks;
device, purpose and use of complex instrumentation;
rules and regulations of labor protection, safety precautions (when servicing electrical installations in the amount qualification group IV) and fire protection.

1.7. During the period of temporary absence of a 5th grade pumping unit operator, his duties are assigned to [deputy position title].

2. Job responsibilities

A 5th grade pumping unit operator performs the following labor functions:

2.1. Maintenance of pumping stations (substations, installations) equipped with pumps and pipe pumps of various systems with a total capacity of over 10,000 to 15,000 m 3 per hour of water, pulp and other non-viscous liquids.

2.2. Maintenance of pumps and pumping units in the field, on construction sites and at industrial water intakes with a pump capacity of over 3000 to 5000 m 3 per hour each.

2.3. Service transformer substations.

2.4. Monitoring and monitoring the uninterrupted operation of drive motor pumps, fittings and pipelines of the serviced area, as well as the fluid pressure in the network.

2.5. Maintenance of a cooling tower for cooling circulating water.

2.6. Inspection and regulation of complex pumping equipment, water pressure devices, instrumentation, automation and safety devices.

2.7. Identification and elimination of complex defects in the operation of pumping units.

In case of official necessity, the operator of pumping units of the 5th category may be involved in the performance of his duties. job responsibilities overtime, in the manner prescribed by law.

3. Rights

A 5th grade pumping unit operator has the right to:

3.1. Get acquainted with draft decisions of the enterprise management concerning its activities.

3.2. Submit proposals for improvement of work related to the responsibilities provided for by this job description for management's consideration.

3.3. Report to your immediate supervisor any deficiencies identified during the performance of your duties. production activities enterprise (its structural divisions) and make proposals for their elimination.

3.4. Request personally or on behalf of the immediate supervisor from heads of departments of the enterprise and specialists information and documents necessary to perform their job duties.

3.5. Involve specialists from all (individual) structural divisions of the Company in solving the tasks assigned to them (if this is provided for by the regulations on structural divisions, if not, with the permission of the head of the Company).

3.6. Require the management of the enterprise to provide assistance in the performance of their official duties and rights.

4. Responsibility and performance evaluation

4.1. The operator of pumping units of the 5th category bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Russian Federation, criminal) responsibility for:

4.1.1. Failure to carry out or improperly carry out official instructions from the immediate supervisor.

4.1.2. Failure to perform or improper performance of one's job functions and assigned tasks.

4.1.3. Illegal use of granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the status of the work assigned to him.

4.1.5. Failure to take measures to suppress identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to ensure compliance with labor discipline.

4.2. The assessment of the work of a 5-grade pumping unit operator is carried out:

4.2.1. By the immediate supervisor - regularly, in the course of the employee’s daily performance of his work functions.

4.2.2. Certification Commission enterprises - periodically, but at least once every two years, based on documented results of work for the evaluation period.

4.3. The main criterion for assessing the work of a driver of 5th category pumping units is the quality, completeness and timeliness of his performance of the tasks provided for in these instructions.

5. Working conditions

5.1. The work schedule of a 5th grade pumping unit operator is determined in accordance with the internal labor regulations established by the Company.

5.2. Due to production necessity The operator of pumping units of the 5th category is obliged to travel to business trips(including local significance).

I have read the instructions on ___________/___________/“____” _______ 20__.

Inspection and regulation of complex pumping equipment, water pressure devices, instrumentation, automation and safety devices. Identification and elimination of complex defects in the operation of pumping units. Must know: the structure and design of equipment for high-power pumping units equipped with engines, pumps and pipe pumps of various systems; design and layout of outer chambers, wells, pipelines and filters; water supply schedule for the serviced area; methods of protecting electrical equipment from overvoltage; rules for carrying out work without removing voltage from electrical networks; device, purpose and use of complex instrumentation; rules and regulations of labor protection, safety precautions (when servicing electrical installations in the scope of qualification group IV) and fire protection. § 211a.

Job description for pumping unit operator of the 4th category

Monitoring the uninterrupted operation of drive motor pumps, fittings and pipelines of the serviced area, as well as water pressure in the network.
Inspection and regulation of particularly complex pumping equipment, water pressure devices, control devices, automation and safety devices.
Identification and elimination of the most complex defects in pumping units.
Inspection and load testing of repaired equipment.
Maintenance of power and lighting installations.
Replacement of control and measuring instruments.
Maintenance of electrical equipment with automatic regulation technological process.
Checking and troubleshooting electrical equipment.

Pumping unit operator: ETCS requirements

Must know: the design and purpose of pumping equipment; installation of piston and centrifugal pumps for pumping liquids (gas); rules for operation and repair of serviced equipment; diagrams of air ducts, suction and discharge pipelines and control devices; design of clinkers and filters; fundamentals of electrical engineering, hydraulics and mechanics; ways to troubleshoot equipment and eliminate accidents; purpose and use of instrumentation; rules and regulations of labor protection, safety precautions (when servicing electrical installations in the scope of qualification group II) and fire protection. § 210. Operator of pumping units (4th category) (as amended by Resolution of the Ministry of Labor of the Russian Federation dated July 19, 1993 N 140) Characteristics of work.

General provisions

For all social guarantees provided for by law. 3.2. Require the management of the enterprise to provide assistance in fulfilling its professional responsibilities and exercise of rights. 3.3. Demand the creation of conditions for the performance of professional duties, including the provision necessary equipment, equipment, workplace that complies with sanitary and hygienic rules and regulations, etc.

3.4.

Attention

Payment of additional expenses for medical, social and professional rehabilitation in cases of damage to health due to an industrial accident and receiving occupational disease. 3.5. Get acquainted with draft decisions of the enterprise management concerning its activities. 3.6. Submit proposals for improvement of the organization and methods of work performed by the enterprise management for consideration.

3.7.

Error 404 page does not exist

Responsibility The pumping unit operator is responsible for:

For failure to perform (improper performance) of one’s official duties as provided for in this Job Description, within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor, criminal and civil legislation of Ukraine.

See other articles in the Job Descriptions section. Read and write useful comments on this article.

Pumping unit operator

Must know:

arrangement and design of equipment for high-power pumping units equipped with engines, pumps and pipe pumps of various systems;
design and layout of outer chambers, wells, pipelines and filters;
automation and telemechanics of serviced equipment;
methods of testing serviced equipment;
complete electrical diagram of the serviced facility (area);
adjustment and repair of instrumentation and instruments automatic regulation;
rules and regulations of labor protection, safety precautions (when servicing electrical installations in the scope of qualification group V) and fire protection.

Occupational safety instructions for the operator of a sewage pumping station

A pumping unit operator of the 3rd category is hired and dismissed from work by order. (position of the head of the organization) 1.4. A pumping unit operator of the 3rd category must know: - the design and purpose of pumping equipment; — arrangement of piston and centrifugal pumps for pumping liquids (gas); — rules for operation and repair of serviced equipment; — diagrams of air ducts, suction and discharge pipelines and control devices; — design of clinkers and filters; — fundamentals of electrical engineering, electrical engineering, hydraulics and mechanics; — ways to troubleshoot equipment and eliminate accidents; — purpose and use of instrumentation; — rules and regulations of labor protection, safety precautions (when servicing electrical installations in the scope of qualification group II) and fire protection. 2.
Domestic monitors Domestic devices Domestic radios Domestic radios Domestic amplifiers Domestic color TVs Domestic black and white TVs Domestic electrophones BONUSES: AT YOUR LEISURE: Interactive flash games Online games Your stories Riddles for adults and children Did you know that... Visual illusions Fun puzzles Catalog Vivasan Palindromes Rubik's cube challenge LIFE STORIES LINKS ADD TO BOOKMARKS Leave a review about the site DIAGRAM© 2000-2018 Design and support: Alexander Kuznetsov Technical support: Mikhail Bulakh Programming: Danil Monchukin Marketing: Tatyana Anastasyeva Translation: Natalya Kuznetsova Contacts When using site materials, a link to http://www.diagram.com.ua is required in Ukraine Job Description for Pumping Unit Operator Handbook / Occupational Safety and Health / Job Descriptions Comments on Article I.

Important

Responsibilities of a pumping unit operator The productivity of the process depends on the correctness of the employee’s actions. A timely response to an accident or breakdown allows you to avoid quite costly consequences. The operator of pumping units is responsible for the following: - preparatory work before starting and stopping; - ensuring the specified mode; - inspecting the unit for preventive purposes; - carrying out repairs; - replacing spare parts.

An employee, like a truck crane operator, must be able to use hand tools, automatic tools and instrumentation. The worker is obliged to follow the rules and instructions that are prescribed in regulatory and methodological documents and comply with safety regulations.

Responsibilities of the operator of pumping units at the KNS station

Don’t turn it on - people are working”; — constantly monitor the serviceability of grounding, the presence and serviceability of protective equipment against electric shock; - floors, stairs and staircases must be dry and clean; — ensure that recesses, staircases, bridges and service platforms, open parts of electrical equipment shafts have guards; - ensure that all valves, gate valves and taps are in good working order and equipped with indicators for the direction of rotation; their maintenance must be accessible and safe; - maintain established order, cleanliness of equipment, station premises, smoke only in designated areas; — if a fire occurs on electrical equipment, it is necessary to turn off the voltage and extinguish it with dry sand or a carbon dioxide fire extinguisher. Extinguishing with water is prohibited.
Library KvantLibrary of electrical engineeringKnow and be ableMass radio library BOOKS ON RADIO ENGINEERING AND ELECTRONICS FOR FREE:CarMicrowave equipmentRecording and playback of soundLamp equipmentFor a beginner radio amateurSecurity and safetyRadar, navigationRadio engineering technologiesRadio control, modelingRoboticsCircuits Theoretical electronics, radio engineering AmplifiersDigital signal processingElectronics in everyday lifeElectronics in medicineElectronics in scienceElectronics for musicians FREE REPAIR BOOKS:Audio equipment repairHome appliance repairVideo equipment repairRepair tube televisionsRepair of semiconductor televisionsRepair of monitorsRepair of office equipmentRepair of radiosRepair of telephones and faxesSatellite televisionTheory of televisionTheory of electronics repair BOOKS ON MEASUREMENTS FOR FREE:Measurements and metrologyMeasuring equipmentMeasuring equipment.
Order of the Ministry of Housing and Communal Services of the RSFSR dated May 14, 1984 No. 221 “On approval and implementation standard instructions on labor protection" I order: 1. To approve and put into effect from September 1, 1984, the Standard Instructions on Labor Safety for drivers of water supply and sewerage pumping stations, chlorination plant operators, and emergency mechanics, agreed upon with the Central Committee of the Trade Union of Workers of Local Industry and Public Utilities Enterprises - restoration work of sewer networks. 2. Heads of water supply and sewerage enterprises, in relation to local conditions, based on the approved Standard Instructions, develop labor protection instructions for workers in the above professions.
3. The Main Computing Center (Comrade Fursik) to publish in the third quarter. this year the specified Instructions in a circulation of 350 copies. 4.

"On approval and implementation of standard instructions on labor protection"

I order:

1. Approve and put into effect from September 1, 1984, agreed with the Central Committee of the trade union of workers of local industry and public utility enterprises, Standard instructions on labor protection for drivers of water supply and sewerage pumping stations, chlorination plant operators, mechanics for emergency repair work of sewer networks.

2. Heads of water supply and sewerage enterprises, in relation to local conditions, based on the approved Standard Instructions, develop labor protection instructions for workers in the above professions.

3. The Main Computing Center (Comrade Fursik) to publish in the third quarter. this year the specified Instructions in a circulation of 350 copies.

4. To send out to the Rosvodokanalnaladka Trust standard instructions for the distribution of Glavvodokanal.

5. Entrust control over the implementation of this Order to the Main Vodokanal (Comrade Elfimova).

F.V. Popov

Standard labor protection instructions for a sewerage pumping station operator

(approved by order of the Ministry of Housing and Communal Services of the RSFSR
dated May 14, 1984 No. 221)

General provisions

1. Persons at least 18 years of age who have undergone training and testing of safety knowledge are allowed to occupy the position of operator of a sewage pumping station. The driver must pass medical examination upon entry to work and periodically once every 6 months.

2. The driver must undergo training on labor protection with a signature in the briefing log: introductory - upon entry to work, primary - at the workplace before admission to independent work, repeated - at least once every 6 months, unscheduled - when changing work and when violations of labor protection rules, current - before performing work for which a permit is issued.

Every year, the operator must undergo training and pass exams on his knowledge of the Safety Rules for the operation of water supply and sanitation systems in populated areas.

Have a group (at least second) for working with electrical installations. Passing the exams is documented in a protocol with the issuance of a certificate of knowledge testing and permission to work at water supply and sewerage facilities.

The driver reports to the foreman (shift supervisor, shop manager).

3. The driver’s duty is established according to the schedule approved by the administration.

Changes to the established schedule can only be made with the permission of the administration.

4. Duty for two shifts in a row is not allowed.

5. The driver is responsible person for ensuring uninterrupted operation and proper maintenance of the equipment and is responsible for failure to take measures to prevent and eliminate the emergency condition of the equipment.

The driver must report all malfunctions of equipment, tools, protective and safety equipment to the foreman (shift supervisor, workshop manager).

6. The driver must work in overalls in accordance with Standard Industry Standards, and his hair must be tucked under his headdress.

7. The driver must know:

Design and rules of technical operation of electrical equipment of a pumping station, operating principles of instruments, pumping units, location of pipelines and valves within the buildings and territory of the station;

These Instructions and instructions for the use of insulating gas masks and fire protection;

Purpose and rules for using protective equipment, methods of providing first aid to victims of electric shock and other accidents.

Driver's responsibilities

1. When taking duty:

By personal inspection, become familiar with the condition and operating mode of the equipment (as well as backup and under repair);

Read the orders and other entries in the log for the previous shift;

Check the presence and serviceability of fences, personal protective equipment, communications, alarms, fire extinguishing, tools, emergency lighting and illumination of workplaces, cleanliness of the room, make sure ventilation is working properly, check the first aid kit is complete;

If an equipment malfunction is detected that threatens the safety of people and requires the intervention of responsible officials, report this to the foreman (shift supervisor, workshop manager);

A driver who accepted a shift with equipment malfunctions and did not report to the workshop administration is responsible for these malfunctions;

Register the acceptance and handing over of the shift with entries in the log signed by the person accepting and handing over the shift, report to the foreman (shift supervisor) about joining on duty;

It is prohibited to accept and hand over a shift during the liquidation of an accident; in this case, the reception and handover of a shift is carried out only upon the appropriate instructions of the enterprise management.

2. While on duty:

Regularly (every 30 minutes) inspect the station equipment, checking the operation and readings of instrumentation, determine the degree of heating of individual components;

Maintain the operating mode of the equipment in accordance with schedules, operating instructions and operational orders of the foreman (shift supervisor, workshop manager);

Timely record the operating mode of units and the readings of instrumentation in the equipment operation log;

When inspecting electrical equipment, do not touch its live parts;

If the pump stops due to lack of voltage, close the pressure valve and report to the foreman (workshop manager);

Before starting the unit, check its serviceability; if the electric motor vibrates strongly or smoke (fire) appears, turn it off immediately;

Before starting repair work on the equipment, it is necessary to de-energize it and take measures to prevent spontaneous start-up; hang a poster on the control panel (starting device) “Do not turn on - people are working”;

Constantly monitor the serviceability of grounding, the presence and serviceability of protective equipment against electric shock;

Floors, steps and staircases must be dry and clean;

Make sure that recesses, staircases, bridges and service platforms, open parts of electrical equipment shafts have guards;

Ensure that all valves, valves and taps are in good working order and equipped with indicators for the direction of rotation; their maintenance must be accessible and safe;

Maintain established order, cleanliness of equipment, station premises, smoke only in designated areas;

If a fire occurs on electrical equipment, it is necessary to turn off the voltage and extinguish it with dry sand or a carbon dioxide fire extinguisher. Extinguishing with water is prohibited.

If it is impossible to extinguish the fire on your own, call the fire brigade through the shift manager (dispatcher);

If you smell gas, immediately inform the foreman (shift supervisor, workshop manager), turn on the ventilation, open windows and doors, remove all people from the room and act as directed by the foreman (shift supervisor, workshop supervisor);

Before entering the room there are bars 15 minutes. turn on the ventilation and check the gas contamination with a LBVK lamp (gas analyzer); After making sure that there is no gas, take an insulating gas mask and go down to the grate room; during the period that the grilles are in the room, ventilation must operate continuously;

When manually cleaning the grates, waste is collected with a rake into a container; mechanical rakes are cleared of waste only after they stop:

Work on waste removal is carried out wearing protective gloves;

When crushing waste, do not allow solid objects that could cause damage to get into the crusher;

In the event of an accident, take immediate measures to restore the station's operating mode by turning on backup units, report the incident to the foreman (shift supervisor, shop manager) and proceed further according to his instructions.

3. At the end of duty:

Check the technical condition of the station’s operating equipment and make appropriate entries in the log;

Clean the engine room and equipment, as well as the area adjacent to the engine room;

Close all hatches and covers that were used during the shift;

Inform the shift worker about the condition of the operating equipment, which is in reserve and under repair, about the shortcomings and malfunctions noticed during work, about the measures taken to eliminate them and about the orders and instructions of the workshop administration;

Pass the shift at the workplace with all entries in the work log;

In case of absence (lateness) of a shift worker, report this to the workshop administration (shift supervisor), and do not leave duty until the shift arrives.

4. The driver is prohibited from:

Leave duty, sleep on duty;

Allow unauthorized persons into the station territory;

Use untested and faulty personal protective equipment, ladders and stepladders;

Use open fire and smoke in the engine room and in the grate compartment;

Use portable lamps with a voltage of more than 6 volts during repair work;

Touch exposed live and rotating parts of equipment;

Carry out repairs on operating equipment and manually brake its moving parts;

Lubricate rotating parts on the go without devices to ensure safety;

Remove safety covers and other protective devices while the electric motor is running;

Dry clothes, shoes, etc. near a running electric motor;

Use faulty lifting mechanisms;

Leave floor hatches uncovered;

Open the doors of electrical distribution cabinets and make repairs, replace fuses and burnt out lamps;

If there is a smell of gas, go down to the grate compartment;

Store lubricating oils, cleaning agents and other flammable materials near electric motors.

Responsibility

The driver who violated this Instruction, bears responsibility in the manner prescribed by law.

VX-T-2 - instructions for servicing pumping stations of water blocks S-6, S-7, S-8, S-7/2, S-8/2. 3.21. VX-T-3 - instructions for servicing pumping stations S-5, S-7, S-7/2, S-23, S-55, S-58. 3.22. VKh-IOT-5 - instructions for labor protection during the operation of high-voltage electric motors in the water supply workshop. 3.23. VH-PB-1 - instructions on fire safety measures in the water supply workshop. 3.24. Instructions on the interaction of water workshop personnel with PCH-17, PCH-20 during fires. 3.25. VX-T-16 - operating instructions for ventilation systems of the water supply workshop. 3.26. VKh-T-20 - instructions for chlorinating industrial recycled water in a water supply workshop. 3.27. VX-T-31 - instructions for conservation technological equipment water supply workshops. 3.28. Instructions for organizing safe traffic vehicles and pedestrians on the territory of enterprises and organizations of MNHP. 3.29.

Job description for pumping unit operator of the 5th category

ON-LINE APPLICATION Agreed Approved by Chairman of the trade union committee Head of the organization 2002 2002 Resolution No. Labor safety instructions for water supply operators General requirements safety. Workers at least 18 years of age who have passed a medical examination, training and safety instructions are allowed to work as a water supply operator. Before being assigned to independent work, the operator must complete training and pass a knowledge test in the commission on electrical safety rules with the assignment of first groups on electrical safety. The water supply operator is allowed to work independently by order of the enterprise. The water supply operator undergoes a periodic knowledge test at the enterprise commission once every 12 months. The water supply operator is responsible for; water supply to the enterprise;

Pumping unit operator: ETCS requirements

Instrumentation and automation, rules for starting and stopping pumping units, methods for troubleshooting equipment and eliminating accidents; 5.6. comply with the established mode of conducting the technological process in accordance with technological instructions; 5.7. train newly hired drivers assigned to him in the process of work in safe techniques and work methods; 5.8. monitor the wearing of issued special clothing and safety footwear by subordinate drivers, and their use of the required protective equipment; 5.9. do not allow unauthorized persons into the pumping room; 5.10. comply with the requirements of instructions and rules on labor protection, fire and gas safety, industrial sanitation in the workplace and when performing one-time work; 5.11. attend production and technical courses at least once every three years followed by passing exams; 5.12.

Error 404 page does not exist

Occupational safety management system. 3.30. Regulations on the procedure for monitoring the operation and accounting for failures of instrumentation and automation equipment (instrumentation and automation). 3.31. Rules for intra-facility and access control. 3.32.

Regulations on the procedure for organizing and carrying out work for a safe stop at long period and conservation of hazardous industrial facilities. 3.33. Regulations on the system for organizing work on operation, maintenance and testing the serviceability of SBS (interlocking and alarm systems).
3.34. Internal labor regulations for employees. 3.35. Instructions on safety measures when working with methanol at enterprises and organizations of MNHP.
3.36.

Instructions on technical investigation and recording of incidents at JSC. 3.37. Emergency response plan. 3.38. Regulations on the division of functions for metrological support of production between workshops and divisions.

3.39.

Job description for 6th grade pumping unit operator

On the actions of employees in the event of detection of a suspicious object or signs of intrusion.” 3.40. No. 2 - instructions “On the actions of employees in the event of receiving a telephone message containing a threat of a terrorist attack in working hours" Persons who have reached the age of 18, who have no medical contraindications, and who have a document of education, qualifications or availability, are allowed to work as pumping unit operators. special knowledge in this profession, who have undergone instruction, theoretical and practical training, internship and passed the exam for admission to independent work.

4. RIGHTS The operator of pumping units has the right: 4.1. stop work in emergency cases, if further continuation of work creates a danger to others or threatens the safety of the equipment; 4.2.

Responsibilities of the operator of pumping units at the KNS station

The driver’s workplace is the entire room in which the equipment and communications necessary for obtaining water are located, as well as the surrounding area, if it is located auxiliary equipment and shut-off and control valves.4. Safety requirements in emergency situations4.1. If a fire occurs in the pumping room, take measures to eliminate it primary means fire extinguishing, call the fire department, notify management. In case of burns, it is necessary to clear the affected area of clothing and shoes.
Bandage the burned surface with a sterile bandage and contact medical institution. Notify the boiler room manager. In case of severe mechanical injuries, place the victim in a safe place, give him a comfortable and calm position and call an ambulance medical care(notify the manager...

Instructions for the operator of a water recycling pumping station

Faulty equipment caused an accident at a paper mill. In the section - Labor safety news On August 1 of this year, a repairman was seriously injured at the production of the Balakhninsky paper mill of Volga JSC. The incident occurred during scheduled maintenance work on the press section of the papermaking…
Rostechnadzor inspected enterprises that do not produce commercial petroleum products, but carry out export supplies. In the section - Occupational Safety and Health News Federal service for Environmental, Technological and Nuclear Supervision (Rostechnadzor) reports that, as part of the execution of the instructions of the Deputy Chairman of the Government Russian Federation Arcadia…

Must know:

arrangement and design of equipment for high-power pumping units equipped with engines, pumps and pipe pumps of various systems;
design and layout of outer chambers, wells, pipelines and filters;
automation and telemechanics of serviced equipment;
methods of testing serviced equipment;
complete electrical diagram of the serviced facility (area);
adjustment and repair of control and measuring instruments and automatic control devices;
rules and regulations of labor protection, safety precautions (when servicing electrical installations in the scope of qualification group V) and fire protection.

Responsibilities of a water supply pump operator

Library KvantLibrary of electrical engineeringKnow and be ableMass radio library BOOKS ON RADIO ENGINEERING AND ELECTRONICS FOR FREE:CarMicrowave equipmentRecording and playback of soundLamp equipmentFor a beginner radio amateurSecurity and safetyRadar, navigationRadio engineering technologiesRadio control, modelingRoboticsCircuits Theoretical electronics, radio engineering AmplifiersDigital signal processingElectronics in everyday lifeElectronics in medicineElectronics in scienceElectronics for musicians FREE REPAIR BOOKS:Audio equipment repairHome appliance repairVideo equipment repairRepair tube televisionsRepair of semiconductor televisionsRepair of monitorsRepair of office equipmentRepair of radiosRepair of telephones and faxesSatellite televisionTheory of televisionTheory of electronics repair BOOKS ON MEASUREMENTS FOR FREE:Measurements and metrologyMeasuring equipmentMeasuring equipment.

Monitoring the uninterrupted operation of drive motor pumps, fittings and pipelines of the serviced area, as well as water pressure in the network.
Inspection and regulation of particularly complex pumping equipment, water pressure devices, control devices, automation and safety devices.
Identification and elimination of the most complex defects in pumping units.
Inspection and load testing of repaired equipment.
Maintenance of power and lighting installations.
Replacement of control and measuring instruments.
Maintenance of electrical equipment with automatic process control.
Checking and troubleshooting electrical equipment.

Water supply pumping unit operator

A pumping unit operator of the 6th category must know: - the structure and design of equipment for high-power pumping units equipped with engines, pumps and pipe pumps of various systems; - design and layout of outer chambers, wells, pipelines and filters; - automation and telemechanics of serviced equipment; - methods of testing the equipment being serviced; - complete electrical diagram of the serviced facility (area); - adjustment and repair of instrumentation and automatic control devices; - rules and regulations of labor protection, safety precautions (when servicing electrical installations in the scope of qualification group V) and fire protection. 2. Job responsibilities The operator of pumping units of the 6th category is assigned the following job responsibilities: 2.1.

JOB DESCRIPTION FOR 4TH GRADE PUMPING UNIT MACHINER

I. General provisions

A pumping unit operator of the 4th category is directly subordinate to __________________.

A pumping unit operator of the 4th category follows the instructions of __________________.

A pumping unit operator of the 4th category replaces __________________.

A pumping unit operator of the 4th category is replaced by __________________.

Must know:
- device and design features centrifugal, piston pumps, vacuum pumps and pipe pumps of various systems;
- arrangement and location of outer chambers, pipelines, grids, wells and instrumentation;
- electrical engineering, hydraulics and mechanics;
- arrangement of serviced electric motors, direct and alternating current generators, transformers, equipment distribution devices, electrical networks and electrical appliances;
- rules for starting and stopping all equipment of pumping units;
- methods for troubleshooting equipment operation and eliminating accidents;
- rules and regulations of labor protection, safety precautions (when servicing electrical installations in the scope of qualification group III) and fire protection.

_________________________________________________________________.

II. Job responsibilities

Maintenance of pumping stations (substations, installations) equipped with pumps and pipe pumps of various systems with a total capacity of over 3,000 to 10,000 cubic meters. m/h of water, pulp and other non-viscous liquids.

Starting, regulating the operating mode and stopping motors and pumps.

Maintenance of pumps and pumping units in the field and on construction sites with a pump capacity of over 1000 to 3000 cubic meters. m/h of water each and wellpoint and vacuum pumping units with a pump capacity of over 600 cubic meters. m/h each.

Maintenance of pumps and pumping units in coal mines with a total pump capacity of over 18,000 cubic meters. m/h of methane-air mixture.

Monitoring the provision of a given pressure of liquid, gas and pulp in the network of the serviced area.

Maintenance of transformer substations under the guidance of a more highly qualified driver.

Identification and troubleshooting of pumping equipment, including electric motors and electrical circuits of process equipment.

Maintenance of power and lighting electrical installations over 1000 V.

Performing electrical work of medium complexity.

Load regulation of the electrical equipment of the site (substation).

Preparation of defect reports for repairs.

_________________________________________________________________.

III. Rights

A pumping unit operator of the 4th category has the right to:

give his subordinate employees instructions and assignments on a range of issues included in his functional responsibilities.

control the implementation of production tasks, timely execution of individual assignments by employees subordinate to him.

request and receive necessary materials and documents related to his activities and the activities of his subordinate employees.

interact with other services of the enterprise on production and other issues included in its functional responsibilities.

get acquainted with draft decisions of the enterprise management concerning the activities of the Division.

propose to the manager proposals for improving work related to the responsibilities provided for in this Job Description.

submit for consideration by the manager proposals on rewarding distinguished employees and imposing penalties on violators of production and labor discipline.

report to the manager about all identified violations and shortcomings in connection with the work performed.

_________________________________________________________________.

IV. Responsibility

A pumping unit operator of the 4th category is responsible for:

For failure to perform (improper performance) of one’s job duties as provided for in this job description, within the limits determined by the current labor legislation of Ukraine.

For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.

For causing material damage - within the limits determined by the current labor, criminal and civil legislation of Ukraine.

_________________________________________________________________.