2.1. When accepting a shift, you must:

2.1.1. Familiarize yourself with the condition, diagram and operating mode of electrical installations included in its service area.

2.1.2. Obtain information from the person handing over the shift about the equipment that needs to be especially carefully monitored to prevent accidents and malfunctions, and about the equipment that is being repaired.

2.1.3. Find out the locations and numbers of installed grounding connections.

2.1.4.Check and accept operational documentation.

2.1.5. Familiarize yourself with all records and orders for the time that has passed since his previous duty.

2.1.6. Make sure that the following items are in good condition and accepted according to the inventory: tools, keys to premises, protective equipment, devices, equipment.

2.1.7.Check the operation of radio communication.

2.1.8. Obtain information from the driver-electrician about the condition of the vehicle.

2.1.9. Register the acceptance and delivery of the shift in the operational log with the signature of the person handing over and accepting the shift.

2.1.10. Report to the shift supervisor about the acceptance of the shift and any comments found.

2.2.Before starting work, the electrician is obliged to check the availability of a personal electrical safety certificate on testing knowledge when working in electrical installations up to and above 1000V.

2.3.Work according to the schedule approved by the head of the workshop or his deputy. Violation of the work schedule is prohibited. Exchange of work schedules is permitted, as an exception, with the permission of the person who approved the work schedule. If an electrician who is supposed to take over the shift fails to show up for a shift, the electrician is obliged to inform the shift supervisor about this and remain at the workplace until the shift arrives.

2.4. Maintain operational documentation related to switching work in electrical installations.

2.5.Fulfill requests for turning off and turning on the electrical equipment of the workshop submitted by the electrical technical personnel of the technological shops.

2.6. Perform operational switching in electrical installations with voltages up to and above 1000V on the equipment assigned to it.

2.7. Prepare workplaces, allow repair crews to work in accordance with the Safety Regulations, and promptly put equipment into operation after completion of repairs.

2.8. Eliminate accidents and emergencies under the leadership of the shift supervisor, together with the driver-electrician of the OVB, having III sq.gr. on electrical safety.

2.9.Extinguish fires in electrical installations according to the instructions for extinguishing fires.

2.10. Strictly comply with the requirements of PBEEP, PTE, PPB, instructions and law
Ukraine on labor protection.

2.11. Inspect the equipment of substations, distribution points, transformer substations, package transformer substations, and overhead lines.

2.12. Identify places of damage, carry out damage elimination and minor
equipment repair.

2.13. Monitor the load of equipment at substations, distribution points, transformer substations, package transformer substations, and overhead lines by order of the shift supervisor.

2.14.Monitor the good condition of grounding, tools, protective equipment and
fire-fighting equipment.

2.15. Maintain constant radio contact with the shift supervisor while the EOD vehicle is traveling, inform him about the work being done and the location.

2.16. Complete preliminary and periodic examinations in the prescribed manner
medical examinations, testing knowledge on electrical safety.

2.17.Cooperate with the workshop administration in organizing safe and harmless working conditions. Personally take measures to prevent any
work situation that poses a threat to privacy or
health, or those around you. Report identified hazards to the shift supervisor or shop management.

2.19. Report every accident, accident or fire to the shift supervisor and take measures to provide first-aid to the victim and eliminate the accident or fire.

2.21. Report violations identified during the shift to the shift supervisor.

2.22.Increase your technical knowledge by independently studying rules, norms, instructions, GOSTs and other regulatory documents on labor protection. Regularly attend technical training classes conducted on the shop floor.

2.23. Constantly attend shop and district meetings on occupational safety and take measures to implement the decisions of the meetings.

Unified Tariff and Qualification Directory of Work and Professions of Workers (UTKS), 2019
Issue No. 4 ETKS
The issue was approved by Resolution of the Ministry of Labor of Russia dated August 12, 2003 N 61

Electrician for maintenance and repair of equipment

§ 87. Electrician for maintenance and repair of equipment of the 3rd category

Characteristics of work. Installation, dismantling, grounding, repair, testing and maintenance of the electrical parts of simple machines, components and mechanisms, signaling and lighting equipment, distribution, subscriber cable and telephone networks. Repair and installation of overhead power lines, installation of lightning protection. Moving power line supports. Replacement and connection of instrumentation: ammeters, voltmeters, pressure gauges. Measurement of current and voltage in low voltage AC and DC circuits. Arrangement of grounding loops. Vulcanization of flexible cables, application of inscriptions. Charging batteries, topping up and replacing electrolyte. Attaching signaling devices, changing electric lamps, electric sockets. Inspection and repair of electrical equipment of manual lamps. Inspection and maintenance of low voltage AC electric motors. Performing stropping works.

Must know: purpose, technical characteristics of serviced machines, electrical equipment, standards and scope of their maintenance; basics of electrical engineering, installation; design and rules of technical operation of low-voltage electrical installations; primary switching diagrams of switchgears and substations, power distribution network; technical requirements for the operation of serviced machines and electrical devices; installation procedure for power electrical devices, simple metal structures and mechanisms; instructions for installation of dry terminations of armored cables; purpose and rules for using instrumentation and tools; rules of admission to work on electrical installations; rules for providing first aid to victims of electric current; name and location of the equipment of the serviced production unit; systems and rules for the operation of light, sound and other alarms in the mine; rules for receiving and giving sound and visible signals; rules of the tag system.

Examples of work.

1. Steam-water fittings - replacement and connection of control and measuring instruments: ammeters, voltmeters, pressure gauges.

2. Fittings for low voltage electrical lighting and signaling networks - installation and installation of devices, lamps, sound signaling devices, switches, switches, etc.

3. Telephone devices - repair.

4. Screens - installation of electrical equipment, metering devices; inspection and maintenance.

5. Crushers - installation of electrical equipment and its maintenance.

6. Flexible, armored cables - laying, suspension, fastening, dry cutting, crimping of low voltage cable lugs.

7. Compressors - installation of electrical equipment, maintenance.

8. Belt conveyors - replacement and installation of electric motors and their connection.

9. Scraper conveyors - replacement and installation of electric motors and their connection.

10. Contactors, starters - disassembly and assembly with replacement of contacts.

11. Pumps - connection of electric motors; checking the serviceability of grounding; maintenance.

12. Plate feeders in primary crushing - installation of electrical equipment and its maintenance.

13. Fuses - overcharging.

14. PM type starters - repair with replacement of contacts and coils.

15. Lamps - repair.

16. Drilling rigs - maintenance of electrical equipment.

17. Ventilation units - installation and connection of electric motors and their maintenance.

18. Shunts, knives, tips and jumpers for electrical devices and electrical machines - manufacturing and installation.

19. Lighting panels, switches and contacts of magnetic starters - repair.

20. Low-voltage electric motors - disassembly, assembly with replacement of bearings, installation and connection.

When performing work under the guidance of an electrician for the maintenance and repair of equipment of higher qualifications - 2nd category.

§ 88. Electrician for maintenance and repair of equipment of the 4th category

Characteristics of work. Installation, dismantling, repair, testing and maintenance of electrical parts of machines, units and mechanisms of medium complexity, equipment of high-voltage substations. Grounding and zeroing of electrical power plants. Checking the insulation of electrical equipment and drying high-voltage motors and transformers. Repair, cutting and vulcanization of high-voltage flexible cables and conveyor belts. Repair of lighting with group spotlights. Replacing couplings. Inspection and repair of electrical equipment of automated lamps. Observation and control of the operation of switchgears, electric motors, transformers, generators, brake electromagnets. Maintenance of converter installations, substations, signaling, centralization, blocking and automatic traffic light blocking of rail transport. Testing of electrical protection equipment at voltages up to 1000 V. Testing of repaired electrical machines, apparatus and devices.

Must know: electrical engineering to the technical minimum; methods and rules for installation, dismantling, repair, testing and adjustment of serviced electrical equipment; design and purpose of electrical machines; design and installation diagrams of ballasts; rules for removing and switching on high voltage current; switching diagrams for workshop switchgears and substations; connection diagrams for stator and rotor windings of electric motors; calculation and selection of wire and cable cross-sections; technical specifications for testing repaired electrical machines, apparatus and instruments; rules for working on electrical installations; instructions for setup and test run of electrical equipment; technology of metal processing and production of electric and gas welding works; instructions: on the production of electric welding work in underground workings, above-mine buildings, on grounding, on the use of electricity in dead-end workings of gas mines and mines, on inspection, repair and testing of mine flexible cables, on inspection and revision of explosion-proof mine electrical equipment.

Examples of work.

1. Ballast control equipment - disassembly, assembly with replacement or restoration, adjustment of parts.

2. High-voltage oil switches - preventive inspection, repair.

3. Screens - repair of electrical equipment.

4. Electric dredges - maintenance, repair and testing.

5. Crushers - installation and adjustment of electrical equipment.

6. Flexible, armored low-voltage, high-voltage cables - repair with installation of ring and couplings.

7. Belt conveyors - repair of control and alarm systems.

8. Scraper conveyors - installation and repair of control and protection systems.

9. Mining machines, drilling rigs and installations, winches - installation, inspection of electrical equipment, maintenance, repair of electric motors.

10. Plate feeders - installation and repair of thyristor converters.

11. Arresters of all types - repair, testing.

12. Electrical reactors, armatures of electrical machines, controllers, relays of all types - dismantling, repair with replacement of individual elements, installation.

13. Flow-transport systems - checking the condition of technological and backup protections, sensors, ratchet stop electromagnets, operation of limit switches, electrical interlocks; installation of sensors.

14. Automatic telephone stations - repair, adjustment, maintenance.

15. Pantographs - assembly of new ones and repairs with editing on a mandrel.

16. Pantographs, phase expanders of electric locomotives - removal.

17. Transformers and switchgears - revision.

18. Aspiration installations - repair of electronic boards and electrical equipment.

19. Ventilation units - maintenance and repair of electrical equipment.

20. Lighting panels, switches and contacts of magnetic starters - repair.

21. Excavators - installation, dismantling, repair of electrical equipment.

22. High-voltage electric motors - disassembly, assembly, replacement of bearings, brush holders, brushes, repair of commutators, elimination of damage to windings.

§ 89. Electrician for maintenance and repair of equipment of the 5th category

Characteristics of work. Installation, dismantling, repair, adjustment, testing, maintenance of the electrical parts of complex machines, components and mechanisms, equipment, instrumentation, automatic installations, telemechanics. Installation and repair of controls. Installation and commissioning of high-frequency telephony units. Testing of electrical protection equipment at voltages above 1000 V. Identification and elimination of defects in automatic control and regulation circuits of mobile and stationary installations. Checking the response time of ground leakage protection devices and the value of the maximum current protection setting for feeder circuit breakers and starters.

Must know: fundamentals of radio engineering, telemechanics, automation, radio electronics; installation of automation and telemechanics equipment; electrical rules and regulations; rules for drawing up electrical wiring diagrams; diagram of the equipment being serviced and its energy supply system; causes and symptoms of malfunctions in the operation of the electrical parts of machines, devices, devices; classification of cables and electrical materials; rules for measuring and testing insulation, capacitance and ohmic resistance of cables, drawing up documentation for repaired equipment; methods of performing work on power lines; rules for testing electrical protective equipment; the procedure for organizing safe work in electrical installations and supervision of operating electrical installations; technical specifications for regulation and testing of complex electrical machines, apparatus and instruments.

Examples of work.

1. Equipment of the dispatcher control panel and monitoring the operating mode of mechanisms - preventive inspection, installation, dismantling, repair, adjustment, maintenance of electronic elements; repair of connecting cables; installation and adjustment of control circuits.

2. Equipment for monitoring coolant flow (hot water and steam) - repair, adjustment and maintenance.

3. Ballast control equipment - installation, adjustment, configuration.

4. APCS system equipment - repair and maintenance.

5. Quasi-electronic automatic telephone exchanges - installation and configuration of components and blocks.

6. High-frequency units, transmitters and receivers, radio stations and radio relay communication equipment - installation and commissioning.

7. High-voltage oil switches - preventive inspection, repair of drives; major repairs with partial or complete replacement of transformer oil.

8. High-voltage cables - repair with installation of couplings.

9. Belt conveyors - adjustment and repair of control and alarm systems.

10. Scraper conveyors - installation, adjustment and repair of control and protection systems.

11. Self-propelled mining machines, drilling rigs and installations, lifting machines - repair of electrical equipment.

12. Magnetic starters - adjustment, repair with replacement of contacts, coils.

13. Electronic voltage regulators, electronic relays, protection panels - inspection, checking electrical parameters, repair.

14. Transformers and distribution devices - inspection, adjustment, repair.

15. Turbogenerators - disassembly, repair, assembly.

16. Excavators, spreaders, transport-dump bridges - alignment of electric motors and gearboxes, their balancing, installation, adjustment of electrical drive circuits.

17. Electric motors, generators, auxiliary electrical machines, electrical measuring instruments, group switches and their drives, controllers and relays of all types - disassembly, repair, assembly, checking the correct connections of electrical circuits.

18. Electrical substations and intra-shop distribution networks, turbochargers, main ventilation fans, lifting, refrigeration units in combination with automation and instrumentation - installation, dismantling, repair, adjustment and maintenance.

§ 90. Electrician for maintenance and repair of equipment of the 6th category

Characteristics of work. Installation, dismantling, repair, adjustment, testing, maintenance of complex electrical machines and devices, instrumentation, automatic installations, telemechanics. Adjustment and testing of automatic systems of electronic, telemechanical, radio relay equipment, isotope relays, sensors, adjustable electric drive systems. Testing the operation and interaction of all control, automation and protection elements. Oscillography and analysis of transient processes in electrical circuits, determination of load and speed from oscillograms. Assembly and testing of circuits based on semiconductor and microelectronic elements. Determination of the actual reliability of functional blocks and circuits. Installation, adjustment and testing of circuits assembled on non-contact elements, and devices for voltages over 1000 V. Adjustment and testing of automation elements and instrumentation in power supply systems, automation and remote control of technological equipment and mechanisms. Adjustment and testing of electronic elements in device protection systems and control stations. Maintenance, repair and testing of electric dredges. Dynamic balancing of armatures of electric machines of all types with the installation of a balancing weight.

Must know: installation of serviced equipment, devices based on semiconductor and microelectronic technology, electronic and telemechanical equipment; design features, operating principles of complex equipment and installations; methods and rules for regulating the operation of complex electrical machines, devices, devices; electrical engineering, telemechanics, radio electronics to the extent necessary for work; installation of high-precision electronic measuring instruments; techniques and methods for dynamic balancing of armatures of electrical machines of all types; rules for operating electrical installations.

Examples of work.

1. Equipment of high-voltage chambers - measuring insulation resistance and checking the interaction of devices.

2. Equipment for monitoring the operation of steam boilers - adjustment, testing.

3. Radioisotope equipment - removal and installation on process equipment; current repairs, dosimetric, radiometric monitoring.

4. Telemechanics equipment type TM 320 - installation and configuration of components and blocks.

5. Generators - alignment during installation.

6. Self-propelled mining machines, drilling rigs and installations - repair, adjustment, regulation and comprehensive testing of particularly complex electrical equipment systems, automation, thyristor control circuits.

7. Automation and remote control devices - regulation.

8. Automatic control system - adjustment and testing of telemechanical, radio relay and quasi-electronic equipment circuits.

9. Speed ​​meters, meters, electronic voltage regulators, electronic relays of all types, protection panels - regulation, testing.

10. Industrial television installations - adjustment and testing.

11. Electrical circuits - checking ohmic resistances.

12. Traction electric motors: auxiliary electrical machines, electrical devices and electrical devices - testing, balancing, adjustment on the stand, taking characteristics and scans.

13. Electric drives with thyristor and frequency-controlled control circuits - installation, adjustment, repair of components and blocks, testing.

§ 91. Electrician for maintenance and repair of equipment of the 7th category

Characteristics of work. Installation, dismantling, adjustment, testing, maintenance of complex control systems of electric drives, electrical machines, devices, automatic installations, telemechanics. Adjustment and testing of automatic electronic units of thyristor excitation, electronic and telemechanical equipment systems, sensors, asynchronous-synchronized adjustable electric drive; maintenance and repair of circuit diagrams and devices using microprocessor technology. Testing the operation and interaction of all control, automation and protection elements, their repair and adjustment. Oscillography and analysis of transient processes in electrical circuits of drives. Assembly and testing of circuits based on semiconductor elements and microcircuits. Installation and adjustment of equipment using microcircuits and logic elements. Adjustment and testing of instrumentation in automated drive systems. Taking equipment characteristics, maintaining technical documentation, filling out forms.

Must know: installation of devices based on semiconductor technology, electronic and telemechanical equipment of the equipment being serviced; design features of complex systems of units and components of self-propelled mining machines; principle of operation, type of microcircuits and electronic assembly devices; the principle of establishing operating modes of complex control systems; electrical engineering, telemechanics, rules for taking oscillograms to the extent necessary for work; installation of serviced high-precision electronic measuring instruments.

Secondary vocational education required.

Examples of work.

1. Electronic equipment for high-voltage and low-voltage circuits of rolling stock - testing, troubleshooting and regulation.

2. Bulldozers, drive control units - repair, adjustment, testing.

3. Instrumentation in automated electric drive systems - repair, adjustment.

4. Pumping stations - adjustment, testing, repair of electronic units of thyristor excitation of electric drives.

5. Panels and control units for the main electric drives of excavators with different bucket capacities - dismantling, installation, testing, adjustment and testing.

6. Control panels for the operation and startup of synchronous electric motors for excavators - dismantling, adjustment, installation, recording oscillograms and analysis of transient processes in electrical drive circuits.

7. Instruments for monitoring insulation, maximum current protection and zero protection - repair, adjustment.

8. Automatic process control systems - installation and commissioning of equipment using microcircuits and logic elements.

9. Turbocompressors - adjustment and testing of automatic electronic thyristor excitation units.

10. Electric motors - adjustment and testing of asynchronous-synchronous control of an electric drive.

This instruction has been automatically translated. Please note that automatic translation is not 100% accurate, so there may be minor translation errors in the text.

Instructions for the position " Electrical mechanic on duty and equipment repair, 3rd category", presented on the website, meets the requirements of the document - "DIRECTORY OF Qualification Characteristics of Workers' Professions. Issue 64. Construction, installation and repair work. (Taking into account the additions approved: by order of the State Committee for Construction and Architecture No. 25 of 08.08.2002, No. 218 of 12.22.2003, No. 149 of 08.29.2003, letter of the State Committee for Construction and Architecture No. 8 / 7-1216 of December 15, 2004, by order of the Ministry of Construction, Architecture and Housing and Communal Services N 9 of December 2, 2005, N 163 of May 10, 2006, N 399 of December 5, 2006, by order of the Ministry of Regional Development , construction and housing and communal services of Ukraine N 558, 12/28/2010)", which was approved by order of the State Committee for Construction, Architecture and Housing Policy of Ukraine on 10/13/1999 N 249. Agreed by the Ministry of Labor and Social Policy of Ukraine. Entered into force on 1 January 2000 The document status is "valid".

Preface

0.1. The document comes into force from the moment of approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. The document has been approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.

1. General provisions

1.1. The position "Electrical mechanic on duty and for equipment repair of the 3rd category" belongs to the category "Workers".

1.2. Qualification requirements: complete or basic general secondary education. Vocational education without requirements for work experience or obtaining a profession directly in production, advanced training and work experience as an electrician (fitter) on duty and in repairing equipment of the 2nd category for at least 1 year.

1.3. Knows and applies in practice:
- purpose, technical characteristics of machines, mechanisms and electrical equipment that are served, standards and volumes of their maintenance;
- basics of electrical engineering, plumbing and installation;
- design and rules of technical operation of low-voltage electrical installations;
- diagrams of primary switching of distribution equipment and substations, distribution power network at the site;
- technical requirements for the operation of machines, mechanisms and electrical devices;
- methods and techniques for processing materials and parts;
- the procedure for installing power electrical devices, simple metal structures and mechanisms;
- instructions for installation of dry partitions, armored cables;
- purpose and rules for using instrumentation and tools;
- rules for performing rigging and slinging work;
- rules for admission to work with electrical installations and supervision of other persons working with them;
- first aid rules;
- name and location of mine workings and rules for moving them;
- systems and rules for the operation of light, sound and aromatic alarms in the mine;
- rules for receiving and giving sound and visible signals, rules for the tag system.

1.4. An electrician on duty and for repairing equipment of the 3rd category is appointed to the position and dismissed from the position by order of the organization (enterprise/institution).

1.5. The electrician on duty and for repairing equipment of the 3rd category reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. An electrician on duty and for repairing equipment of the 3rd category supervises the work of _ _ _ _ _ _ _ _ _ _ .

1.7. An electrician on duty and for repairing equipment of the 3rd category during absence is replaced by a person appointed in the prescribed manner, who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. Characteristics of work, tasks and job responsibilities

2.1. Performs installation, dismantling, repair and maintenance of mechanical and electrical parts of simple mining equipment, alarm and lighting, distribution, subscriber cable and telephone networks, grounding.

2.2. Repairs and installs overhead power lines, installs a hail surveyor.

2.3. Moves power transmission poles.

2.4. Replaces and connects control instruments: ammeters, voltmeters, ammeters.

2.5. Measures current, voltage in AC and DC circuits, low voltage.

2.6. Arranges grounding loops.

2.7. Performs vulcanization of flexible cables, electric welding work during repairs and produces grounding loops, protective casings for machines and mechanisms.

2.8. Paints equipment, applies inscriptions.

2.9. Lubricates the equipment it serves.

2.10. Takes oil samples and replaces them.

2.11. Charges batteries, tops up and replaces electrolyte.

2.12. Performs hanging signaling devices, replacing electric lamp sockets.

2.13. Inspects and repairs electrical equipment of bathhouses, loading equipment on the mine surface, surface workshops.

2.14. Disassembles, assembles, washes, tests, lubricates, accepts, issues, and carries out preventive repairs of pneumatic tools.

2.15. Performs rigging and slinging work.

2.16. Knows, understands and applies current regulations relating to his activities.

2.17. Knows and complies with the requirements of regulations on labor protection and environmental protection, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. An electrician on duty and for repairing equipment of the 3rd category has the right to take actions to prevent and eliminate cases of any violations or inconsistencies.

3.2. An electrician on duty and for repairing equipment of the 3rd category has the right to receive all social guarantees provided for by law.

3.3. An electrician on duty and for repairing equipment of the 3rd category has the right to demand assistance in the performance of his official duties and the exercise of his rights.

3.4. An electrician on duty and for repairing equipment of the 3rd category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.

3.5. An electrician on duty and for repairing equipment of the 3rd category has the right to get acquainted with draft documents relating to his activities.

3.6. An electrician on duty and for repairing equipment of the 3rd category has the right to request and receive documents, materials and information necessary to fulfill his job duties and management orders.

3.7. An electrician on duty and for repairing equipment of the 3rd category has the right to improve his professional qualifications.

3.8. An electrician on duty and for the repair of equipment of the 3rd category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. An electrician on duty and for repairing equipment of the 3rd category has the right to familiarize himself with the documents defining the rights and responsibilities of the position held, and the criteria for assessing the quality of performance of job duties.

4. Responsibility

4.1. The electrician on duty and for repairing equipment of the 3rd category is responsible for failure to fulfill or untimely fulfillment of the duties assigned by this job description and (or) non-use of the granted rights.

4.2. An electrician on duty and for repairing equipment of the 3rd category is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety precautions, industrial sanitation and fire protection.

4.3. An electrician on duty and for repairing equipment of the 3rd category is responsible for disclosing information about an organization (enterprise/institution) related to a trade secret.

4.4. An electrician on duty and for repairing equipment of the 3rd category is responsible for non-fulfillment or improper fulfillment of the requirements of internal regulatory documents of the organization (enterprise/institution) and legal orders of management.

4.5. An electrician on duty and for repairing equipment of the 3rd category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. An electrician on duty and for repairing equipment of the 3rd category is responsible for causing material damage to an organization (enterprise/institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. An electrician on duty and for repairing equipment of the 3rd category is responsible for the unlawful use of the granted official powers, as well as their use for personal purposes.

5. Examples of work

5.1. Packing oil seals, replacing bushings, O-rings, tightening connecting bolts on flanges and joints of steam-water fittings.

5.2. Installation and installation of instruments, lamps, sound, signaling equipment, switches and switches for electric lighting fixtures and low voltage signal networks.

5.3. Telephone repair.

5.4. Replacement of slopes, bearings, couplings, buffers, straightening of bodies of mine trolleys and for the delivery of people in mine workings.

5.5. Replacement of screens.

5.6. Laying, hanging, fastening of armored and flexible cables, dry processing of low voltage cables.

5.7. Replacement of rollers, roller supports, electric motors, gearboxes, drums of drive and tension heads on conveyors and regulation and tension of belts and chains.

5.8. Installation and dismantling of scraper conveyors.

5.9. Replacement of pulleys, pins, fastening of loading machine ropes.

5.10. Replacement of bushings, connecting pins, couplings; stuffing of oil seals; installation and fastening of shield measures; checking the serviceability of grounding; connection of pipelines; connecting electric motors; pump maintenance.

5.11. Installation, dismantling, repair, maintenance of tippers, feeders, pushers, stationary drainage equipment, jackhammers, rotary hammers.

5.12. Repair with replacement of contacts and coils of magnetic starters.

5.13. Repair of lamps, respirators.

5.14. Laying, manufacturing and installation of supports for pipelines with a diameter of up to 150 mm; replacement of individual sections and shut-off valves of pipelines with a diameter of up to 150 mm.

5.15. Installation, dismantling, repair of pipelines for backfilling work.

5.16. Repair and maintenance of self-propelled drilling rigs with pneumatic motors.

5.17. Repair of lighting panels, switches and contacts of magnetic starters.

5.18. Disassembly, assembly with replacement of bearings, installation and connection of low-voltage electric motors.

I. GENERAL PROVISIONS

1.1. An electrician who repairs electrical machines belongs to the category of workers; he is hired and dismissed by order of the general director of the enterprise upon the recommendation of ______________.
1.2. A person with secondary or primary vocational education is appointed to the position of electrician for repairing electrical machines.
1.3. An electrician who specializes in repairing electrical machines reports to ____________________________.
1.4. In his activities, an electrician repairing electrical machines is guided by:
- legislative and regulatory documents regulating the production activities of the enterprise;
- methodological materials related to relevant issues;
- the charter of the enterprise;
- labor regulations;
- orders and instructions of the general director and immediate supervisor;
- this job description.

II. Job responsibilities of an electrician for repairing electrical machines

2.1. Metalworking of parts.
2.2. Cleaning, rinsing and wiping dismantled parts, manufacturing simple metal and insulating structures.
2.3. Delivery to the workplace, preparation for work and cleaning of plumbing tools, equipment, fixtures and materials.
2.4. Packaging of electrical measuring instruments, measuring instruments and equipment for transportation.
2.5. Disassembly, repair and assembly of simple parts and assemblies of electrical machines, instruments and auxiliary equipment using simple plumbing tools and accessories, checking and repair of simple ballasts, simple rigging work associated with the movement of individual parts and assemblies of equipment under the guidance of a more highly qualified electrician.
2.6. Drawing up a drawing, sketch of a simple part, electrical circuits.
2.7. Drawing patterns of simple parts and marking them for procurement of materials.
2.8. Processing of insulating materials according to drawings.
2.9. Soldering with tin, copper, silver solder. Measuring resistance with a megohmmeter.
2.10. Adjustment and refueling of plumbing and special tools, testing and preparation for operation of repair devices and mechanisms. Use of electric, pneumatic and measuring tools.
2.11. Rigging work during the repair of electrical machines when moving components and parts using simple mechanization means.
2.12. Current and major repairs according to the standard range of turbogenerators and their exciters, synchronous compensators, converters, umformers, etc.
2.13. Repair of sealing bearings, gas coolers and electrical parts of electric precipitators.
2.14. Performing precise and complex repair and assembly work.
2.15. Repair of equipment connecting generators, synchronous compensators, etc.
2.16. Determination of malfunctions and defects in equipment and equipment, ways to eliminate them.
2.17. Determination of the range and quality of materials used in the repair of electrical machines.
2.18. Selection of the necessary rigging equipment for lifting and moving components and parts of equipment, working with the help of lifting machines and mechanisms, special devices.

III. An electrician for repairing electrical machines must know:

3.1. Information on the strength of materials;
3.2. Scope of acceptance and preventive tests of electrical machines and methods of their implementation;
3.3. Diagrams of internal connections of various types of windings of electrical machines;
3.4. Technical requirements for processing winding conductor materials and restoring defective insulation;
3.5. Basic technical characteristics of all equipment, fixtures, tools, apparatus and measuring instruments used in the repair of electrical machines in the conditions of existing power plant workshops, organization of work in a team.
3.6. Design features of turbogenerators, synchronous compensators, converters and other auxiliary devices;
3.7. Work methods and sequence of operations for disassembling, repairing and assembling high-power electrical machines according to the standard nomenclature;
3.8. Thermal control and automation devices, fire-fighting devices;
3.9. Equipment for the gas-oil system of hydrogen-cooled turbogenerators;
3.10. Device for providing hydrogen to power plants; standards for testing the electrical insulation strength of electrical machines;
3.11. Techniques for removing and inserting heavy generator rotors; methods of work for partial and complete rewinding of stator and rotor windings;
3.12. Methods for centering and balancing electrical machines; techniques for particularly complex rigging work when repairing electrical machines of any power.

IV. Electrical mechanic's rights to repair electrical machines

4.1. An electrician who repairs electrical machines has the right to:
4.2. Gets acquainted with draft decisions of the enterprise management concerning its activities.
4.3. Submit proposals for improvement of work related to the responsibilities provided for in these instructions for consideration by management.
4.4. Receive information and documents from immediate managers on issues within his competence.
demand from the management of the enterprise assistance in the performance of their official duties and rights.

V. Responsibility of an electrician for repairing electrical machines

An electrician for repairing electrical machines is responsible for:
5.1. For failure to perform (improper performance) of one’s job duties as provided for in this job description, within the limits determined by the labor legislation of the Russian Federation.
5.2. For offenses committed in the course of carrying out their activities - within the limits determined by the administrative, criminal and civil legislation of the Russian Federation.
5.3. For causing material damage - within the limits determined by labor, criminal and civil legislation of the Russian Federation.

4. Rights

An electrician has the right:

4.1. Make proposals to the head of MKDOU d/s No. 000 on issues of organization and conditions of his work activity;

4.2. Use information materials and regulatory documents necessary to perform your official duties;

4.3. Pass certification in the prescribed manner with the right to receive the appropriate qualification category;

4.4. Protect professional honor and dignity.

4.5. Get acquainted with complaints and other documents containing an assessment of his work, give explanations on them.

4.6. Confidentiality of the disciplinary (official) investigation, except for cases provided for by law.

4.7. Make proposals to improve labor safety conditions.

4.8. Enjoy all rights regarding working hours, rest time, vacations, social security, which are established by the constituent documents and labor legislation.

5. Responsibility

The electrician is responsible for:

5.1. For the safety of material assets of MKDOU d/s No. 000;

Compliance with internal labor regulations;

For causing material damage within the limits determined by the current labor, criminal and civil legislation of the Russian Federation.

Timely completion of medical examination.

5.2. For non-fulfillment or improper execution without good reason of the Charter and Internal Labor Regulations of MKDOU d/s No. 000, legal orders of the head of MKDOU d/s No. 000 and other local regulations, job responsibilities established by these instructions, including for non-use of granted rights , an electrician bears disciplinary liability in the manner prescribed by labor legislation.

5.3. For culpable infliction of damage to MKDOU d/s No. 000 or to participants in the educational process in connection with the performance (non-performance) of their official duties, the electrician bears financial liability in the manner and within the limits provided for by civil law

5.4. For violation of fire safety rules, labor protection, sanitary and hygienic rules for organizing the educational process, an electrician is brought to administrative responsibility in the manner and in cases provided for by administrative legislation.

6. Relationships and connections by position

Electrician:

6.1. Works on a normal working day according to a schedule drawn up and approved by the head of the MKDOU d/s No. 000.

6.2. Receives instructions on the rules of sanitation and hygiene, safety and fire safety under the guidance of the head of the household.

6.3. P reports to the head of MKDOU d/s No. 000 and the head of the household.

6.4. Receives from the administration information of a regulatory, legal, organizational and methodological nature, gets acquainted with the relevant documents against receipt.

6.5. Systematically exchanges information on issues within his competence with the head of MKDOU d/s No. 000, the head of the household.

I have read the job description and received a copy.