We give a fur product a second life - we learn how to dye fur at home. How to easily dye the fur of arctic fox, mink, silver fox, and fox at home? Faux fur dye

Happy owners of fur items know that they fade over time. To restore color, you don’t have to turn to professionals for help - you can do it at home. Knowing how to dye fur, you minimal costs give the product a second life.

Preparation

Before proceeding directly to painting, the fur must be prepared. Clean it thoroughly from dust and dirt so that the paint adheres well. For these purposes, you can use an alkaline solution.

For a liter of water you need to take the following components:

Mix all ingredients to obtain a homogeneous mass. It is convenient to apply it with a brush. Be sure to wash off the product. You can also use another composition: combine water, vinegar, and alcohol in equal proportions.

The wrong side, the inner side, also needs to be processed. It is necessary to apply glycerin or fatty cream to it.

This will prevent skin deformation. The fur must be pinned to a board so that the item does not lose its shape during the process of dyeing and drying.

If the interior is poorly painted, it will “shine”, creating the effect of sparse fibers. It can be tinted from the inside out. How to paint the inside of the fur? You can use a special product or apply hair dye after testing it on an inconspicuous area.

Using hair dye

It is often used to color arctic foxes. It is quite dense, so it is better to buy two or three packages so that the color is rich and uniform.

Before applying the composition to the entire surface, test it on a small piece.

You can see how it “behaves” when interacting with chemicals. Choose a paint one or two shades darker than the natural color - it will make its color richer.

If a thing has turned yellow, it is better not to paint it, but to lighten it. This can be done using hydrogen peroxide. Only after this is it necessary to apply the coloring composition of the appropriate shade.

How to apply paint?

Spray paint

Owners of items made from arctic fox fur sometimes notice that the tips begin to turn yellow. To restore the original appearance, it is not necessary to paint the entire product; it is enough to use suede paint from an aerosol can.

Is it possible to dye mink products?

Real fur is always in fashion. But over time, stylish mink items lose their rich color and shine. How to dye fur at home? There is nothing difficult about this if you follow the basic rules.

Often women dye their mink with regular hair dye. Before applying the composition, mink fur must be prepared in the same way as arctic fox fur. To make the procedure easier, you can use an aerosol or spray bottle. Spray the product at a distance of approximately 70 cm. Do not forget to comb the hairs with a brush or at least rub them with your hands. To dry, you can use a hairdryer or allow it to dry naturally. Hair balm applied to the surface will give shine and softness. Be sure to rinse it off thoroughly.

How to dye faux fur

Products made from it are very popular due to their attractive appearance and reasonable cost. But over time, faux fur needs painting.

1. If you want to radically change the color of the product, choose hair dye high degree perseverance. To refresh the shade, a tinting shampoo is suitable.
2. Pre-clean the product from dust and dirt with a swab soaked in shampoo. Apply the coloring composition to a small area to evaluate the result.
3. In order for the entire surface to be painted well, the product must be well stretched and fixed. Run the brush in the direction of the grain, grabbing the fabric as well. Follow the dyeing time specified in the instructions and rinse the fur thoroughly. Brush the wet bristles with a brush and let the product dry.

If you know how to dye real or faux fur, your items will always look fresh and neat.

Every home must have things that were made using faux fur. Whether it’s a bag, a collar, interior items or even a fur coat, at one point you will notice that the product has become less attractive, and marketable condition and completely lost.

To revive your favorite item, you need to put in a little effort and dye or tint the faux fur yourself, even at home. Before starting work, analyze how your item looks and think about what you want to get after processing, because if you want to change the color radically, then you will have to tinker with the choice of dye, but if you only want to renew the item, then you need to choose tones closer to what color your product is.

In any case, regular hair dye is used as a dye, choosing a more durable and high-quality one. If you need to slightly refresh the product, you can use regular tinting shampoos.

Before painting, the product must be thoroughly cleaned; any traces of dirt or grease will cause the paint to apply unevenly, and some areas will not be touched up at all. About a day before dyeing, wipe the contaminated areas with a cotton swab, which is soaked in a soap solution or water. detergent(anyone).

Once the faux fur is dry, find a small area that won't be visible and do a little testing. Paint it, and after drying, see if this is the color you wanted to achieve. If you are happy with everything, then start painting the entire product.

The product itself needs to be slightly stretched before starting work. This is necessary so that some areas do not go unnoticed. You can use a chair or a regular wooden board as a stretcher; you can secure the product with clothespins.

Dilute the paint according to the manufacturer's instructions; when painting, use a soft brush. All movements during work are carried out only in the direction of the hairs faux fur, while lightly pressing the brush to grab the base fabric.

When painting is completed, wait the time specified by the manufacturer. Rinse off the paint with gentle movements, trying not to damage the fur. You can use a clean, damp swab to remove excess paint.

While still wet, the artificial fur after dyeing is combed and left to dry, then combed again, straightening the fibers in the desired direction. After drying, the product will acquire a new, bright and rich shade.

Please note that you can remove the item from the stretch only after the fur is completely dry, otherwise the faux fur item may change significantly in size. It may become smaller or it may simply be “pulled” in some direction.

Well, now your favorite thing looks attractive again and its color is almost impossible to distinguish from the original color! If the shade does not suit you, you can repeat the painting after a week.

Recently, products made from have gained immense popularity. In every home there are things made from this synthetic material. In appearance, synthetic fur is not much different from natural products, but it allows you to significantly save your budget when purchasing a product.

Over time, any product, be it a fur coat, vest, bag or collar, loses its shine and attractiveness, becomes faded and worn out. To do this, you can paint it a brighter, more saturated color. Knowing the rules of coloring, any housewife will be able to carry out this procedure independently at home.

Paint selection

A dyed item can become a designer wardrobe item

Restoring a fur product will require a lot of time and effort, so you need to be patient and carefully follow all the dyeing rules. You should start by choosing paint. It is important to imagine exactly what color you would like to achieve. If you plan to only slightly update the product, restoring its lost attractiveness, then you need to choose shades that are close to the original color. It is quite possible for a radical change in the color of the fur. In this case, it is important to remember that light colors are repainted into darker ones, and not vice versa.

To dye faux fur, use regular hair dye. To achieve a lasting result and not spoil the base fabric, it is imperative to use high-quality paint. If you just need to refresh a product or accessory, you can use a tinted shampoo. The color of the fur will not change dramatically, but will become brighter and more saturated.

Preparing the product for painting

Before you start dyeing, it is recommended to thoroughly clean it from dust and grease so that the dye is distributed evenly over the entire surface of the material. The treatment is carried out one day before staining.

Pour warm water into a small container, add shampoo or liquid soap, foam and use a soft brush to treat the fur in the direction of the pile. The remaining soap solution is collected with a damp swab. If the product is small, for example a hat or collar, it can be completely immersed in soap foam and washed. Then the item is rinsed, gently wrung out through a towel and dried.

After the product has dried, it is necessary to test the paint for small area fur located on the reverse side. If the resulting shade is to your liking, you can begin painting the entire product.

How to dye faux fur correctly

Faux fur tinting

When painting, the main thing is to achieve uniform application of paint to each area of ​​the product. To get a good result, the fur should be stretched and secured with clothespins on a board, table, or chair.

The paint is diluted according to the manufacturer's instructions, and you can use a small clothes brush to apply the mixture to the fabric. You should dye the fur in the direction of the pile, pressing lightly on the brush to paint the fabric base.

Having distributed the coloring composition evenly over the surface of the material, you need to leave the product for the time specified in the instructions so that the paint is thoroughly absorbed and fixed to the fibers. Then the fur is carefully washed with water, and where necessary, the remaining dye is removed with a damp swab. Do not rub the fibers too hard against each other to avoid damaging the structure.

Immediately after dyeing, the still wet fur should be combed with a sparse comb with rounded ends, and then leave the product to dry completely. Dry fur should be combed again, giving the pile the desired direction.

Important to remember

The product must remain in the stretched position until completely dry, otherwise the dimensions of the treated surface may change significantly. Moreover, the thing can both shrink and stretch, as a result of which it will simply be damaged.

It is not always possible to get the desired shade on the first try. The quality of the result obtained depends on the presence of certain experience in painting and the degree of wear of the product. If there is a need to correct any defects, you can repeat the procedure at least after 7-10 days.

With a little attention and patience, you can turn an old, worn fur item into a bright, fashionable, attractive product at home and significantly save your budget.

Products made from faux fur are a real find for many fashionistas who have long wanted to acquire fur items, but could not afford to buy them due to their high cost. The modern fur industry has reached an unprecedented level of development, so artificial things sometimes turn out no worse than things made from natural fur. Fur coats, bags, interior items, - all this looks simply fantastically attractive - and most importantly, it is not that expensive.

However, faux fur is not immune to losing its original appearance, so there may often be a need to return it to its color and original appearance.

Coloring instructions

So, before you start painting, decide what color you want to paint the canvas. There are a lot of options: you can simply adjust the color tone of the product by tinting it, or you can decide on more drastic experiments - for example, change the color.

Most main question, which worries those who are going to dye fur products - how to dye faux fur. It's simple: hair dye is most often used for coloring. If you plan to radically repaint your fur item, use durable paints. To update the color (especially for light colors), it is enough to buy a tinting shampoo.

Before you start painting, prepare the surface - remove all traces of grease and dirt, otherwise there is a risk that the paint will not adhere well. As a rule, simple stains can be easily cleaned with a cotton swab dipped in soapy water or shampoo. Don’t rush to apply paint right away - try painting on a small piece of fabric (this could be fur on the reverse side or another inconspicuous place). If you are satisfied with the desired result, start painting the entire product.

Secrets of coloring

The dyeing process has its own secrets, after learning which you can carefully dye your faux fur. First, stretch the faux fur well, otherwise the final result will disappoint you, and it is possible that not all places will be thoroughly painted. If you radically change the color of the fabric, then paint with a brush so that not only the “hairs” are captured, but also the base fabric itself. Try to follow the instructions as closely as possible if you were dyeing your own hair rather than fur.

After the entire canvas has been painted, leave the paint to dry for the time specified in the paint instructions. Take your time, because the coloring pigments must be well absorbed into the product - this is the only way you will get a perfectly ready-to-wear product that will delight you with its appearance and will last a long time.

The final stage is washing off the paint. If you see that the paint has adhered well to the surface of the product, wash the fur without shampoo, the main thing is not to rub too hard so as not to damage the structure of the fur. Then comb the product while it is still wet and leave to dry. After complete drying, comb the fabric again.

Fur products have always been distinguished by their invulnerability to high temperature changes and other factors. external environment, however, sooner or later the fur on them may fade, lose its former shine, become stained, or simply shed. However, the loss of color in a fur coat is not a death sentence at all, and you can restore its former brightness without turning to specialists. And today we will look at how to paint natural fur(using the example of mink and arctic fox) and artificial in the most effective ways.

We dye products made from arctic fox fur

In case of very severe contamination or discoloration, it is necessary to treat its surface with some alkaline solution. Coloring elements do not penetrate well into the structure of oily or dirty hair. Therefore, to achieve an impeccable result, you need to make an appropriate solution. The cleaning product is prepared as follows:

1. Add 2 teaspoons of salt to 1 liter of water.
2. 1 teaspoon of ammonia and the same amount of detergent.
3. 2 teaspoons baking soda

The resulting substance should be applied to the fur with a brush. This product dries naturally.

When processing the inside of a fur coat, it should be pre-treated with glycerin or thick cream. This is done in order to prevent it from drying out.

Which color is better to choose?

The answer to this question is ambiguous. In any case, the final choice is yours. However, experts recommend painting the arctic fox in dark colors. If you want to dye your fur coat a lighter shade, pre-treat it with hydrogen peroxide.

Before dyeing fur at home, you need to thoroughly moisten the fur coat in water. Apply regular hair dye to the surface of the fur. You should not hesitate to apply this substance. Do not forget about safety measures - use rubber medical gloves when working. They can be purchased at almost any pharmacy individually or in packages of 100 pieces. When applying paint to fur, smooth the fur coat with your hand - this will allow the substance to spread more evenly over the surface. After this, it is necessary to soak the product for several minutes (as indicated on the instructions with the paint). Next, rinse the fur in warm water. It's best to add vinegar to it. Now you can move on to drying. To prevent the fur from shrinking in the future, carefully stretch it. Pin it in place if necessary.

How to dye mink fur?

Mink fur is very close in structure and appearance to human hair, so it should only be dyed using an aerosol or spray bottle at a distance of no less than 50 and no more than 80 centimeters from the surface. In order for the paint to be well absorbed into the material, you need to comb it thoroughly after each application of a new layer. Using a comb, the paint is more evenly distributed over the surface of a fur coat and other fur products, as a result of which they will look fresh and attractive. As we noted earlier, mink is very similar in structure to human hair. Because of this, you need to select a paint for it that would not harm its qualities. It is best to use a material that has been tested on your own curls, that is, regular hair dye. This is sold in almost every supermarket and market. The range and variety of colors will satisfy even the most capricious fashionista, so choose the appropriate option, and then feel free to apply paint to your fur coat.

Drying

As for drying, such restored products can be treated with a regular home hairdryer. At the same time, you should periodically comb the fur so that it does not mat in the future. To add shine to your fur coat, use hair balm. It will soften the fur well and make its color more saturated.

How to dye faux fur?

First of all, you need to decide what color you will dye this fur. Although in general the principle of work is no different from whether you repaint a fur coat completely or only partially treat its surface. The only difference is time.

How to dye faux fur? As is the case with natural the best way there will be hair dye. If you want to make the color of your fur coat dark or light (that is, one that is very different in shade from the true one), use permanent options. If you are going to process the fur only partially, a regular tinting shampoo is quite suitable for such purposes.

So, you bought the right paint. What to do next? Before dyeing fur at home, you need to thoroughly degrease the surface of the fur coat and remove all dirt from it. To do this, use a cotton swab previously soaked in detergent or shampoo. And one more thing - before painting, it is better to check the color of the paint on a piece of paper in advance. Sometimes it happens that the bottle does not match the specified shade. Or you just won't like him. Then you will have the opportunity to change it, and in the meantime the fur coat will not suffer from double “torture”.

How to dye fur at home? When applying the material to the fibers, make sure that the fur is evenly distributed on the surface. To avoid unpainted areas, use a comb (same as with natural products). The material itself is applied with a brush in the direction of the fibers. Thus, the paint will capture not only the upper part of the fur coat, but also its fabric base.

Wait a few minutes until all the pigment is absorbed. The exact timing varies for each paint, so always follow the application instructions. After the paint is well absorbed into the fur, rinse it with water and, if necessary, treat with shampoo. If the fur coat can be washed well, you can put it in the washing machine. After this, comb the fibers with a comb and let the product dry. After drying, comb again. If the fabric base of the fur coat cannot be washed, remove any remaining paint from it with pieces of a cotton swab soaked in warm water.

Conclusion

So, we found out how to dye fur at home, as well as what products you need to have on hand for this.